enum22 members

ZplFaultKind

public enum ZplFaultKind

Printer conditions and communication faults simulated by ZplVirtualPrinter (ZplVirtualPrinter.Faults).

Values

Name	Value	Description
`PaperOut`	`0`	Media out: ~HS paper out flag, ~HQES error 0x1. Labels stay in the buffer until cleared.
`RibbonOut`	`1`	Ribbon out: ~HS ribbon out flag, ~HQES error 0x2.
`HeadOpen`	`2`	Printhead open: ~HS head up flag, ~HQES error 0x4, SGD head.latch "open".
`HeadOverTemperature`	`3`	Printhead over temperature: ~HS over temperature flag, ~HQES error 0x10.
`MotorOverTemperature`	`4`	Motor over temperature: ~HQES error 0x20.
`CutterFault`	`5`	Cutter fault / jam: ~HQES error 0x8 (also raised for cutter modes when the printer has no cutter).
`Pause`	`6`	Pause (like ~PP or the PAUSE key): ~HS pause flag, ~HQES error 0x10000; cleared by ~PS.
`HeadUnderTemperature`	`7`	Printhead under temperature: ~HS under temperature flag (the printer keeps printing).
`CorruptRam`	`8`	Corrupt RAM (configuration data lost): ~HS flag j.
`PaperNearEnd`	`9`	Paper near end: ~HQES warning 0x8.
`CleanPrinthead`	`10`	Clean printhead: ~HQES warning 0x2.
`ReplacePrinthead`	`11`	Replace printhead: ~HQES warning 0x4.
`BufferFull`	`12`	Receive buffer full: ~HS buffer full flag; the printer stops reading from the socket (TCP back-pressure).
`OutOfMemory`	`13`	Printer memory full: ~DG/~DY/~DU/^DF downloads are rejected (also raised as an event when the memory is exhausted).
`RfidVoid`	`14`	RFID encode error: labels with ^RF/^WT/^RQ print VOID and are retried (^RS n tries, error handling e).
`DropLabels`	`15`	Labels are lost: rendered but not printed (`LabelDropped`).
`Disconnect`	`16`	Connection reset (RST): with `ZplFaultTrigger.AfterBytes` exactly at that byte (the rest of the job is lost), otherwise all open connections.
`CommunicationTimeout`	`17`	Communication timeout: the printer neither reads nor answers (connections stay open).
`Latency`	`18`	Every response is delayed by `ZplFaultRule.Delay`.
`SlowReceive`	`19`	Data is read at `ZplFaultRule.BytesPerSecond` (slow printer, host writes block).
`PartialWrites`	`20`	Responses are written in pieces of `ZplFaultRule.ChunkSize` bytes with `ZplFaultRule.Delay` in between.
`PowerOff`	`21`	Printer switched off: connections are reset, new connections refused, the buffer is lost; clearing powers it on again.